Model XS-8S
8" ANSI self priming, solids handling pump
- Bare Weight: 1593lbs
- Shipping Weight: 1665lbs
- Impeller Diameter: 14.75"
- Dimensions: 40.38" x 27.75" x 42.06"
- Max Solids: 3"
- 650rpm (9ft) - 750rpm (12ft)
- 850rpm (15ft) - 950rpm (17ft)
- 1050rpm (20ft) - 1150rpm (21ft)
- 1250rpm (22ft) - 1350rpm (23ft)
before using the table, check the NPSH
| Item | Description | AP Part No. | GP Part No. | QTY |
|---|---|---|---|---|
| 1* | impeller S8,XS8,XS8S - DI/STD | 314.010.100 | 12349-11000 | 1 |
| 1* | impeller S8,XS8,XS8S - CD4 | 314.010.104 | 12349-1718H | 1 |
| 2* | gasket, seal plate S8,XS8,XS8S,I6 | 314.010.200 | 12350G-20000 | 1 |
| 3* | seal, mech. - 1.88" (cart.w/sleeve) ∆ | 314.010.310 | 46513-154 | 1 |
| 3* | seal, mech. - 1.88" (comp.no-sleeve) ▲ | 314.010.300 | 1 | |
| 4* | bearing, I/B - S8,XS8,XS8S,S10,XS10,I6 | 314.011.300 | 23421-461 | 1 |
| 5 | housing, bearing XS8,XS8S - STD | 314.010.450 | 38251-412-10000 | 1 |
| 7 | vent, air | 310.010.600 | S1530 w/bushing | 2 |
| 8* | o-ring - Buna | 314.011.600 | S1914 | 1 |
| 8* | o-ring - Viton | 314.011.601 | 25154-458 | 1 |
| 9* | bearing, O/B - S8,XS8,XS8S,S10,XS10,I6 | 314.012.300 | 23422-412 | 1 |
| 10 | cap, bearing, S810,XS810,I6 - STD | 314.010.900 | 38322-415-10010 | 1 |
| 11 | shaft XS8,XS8S - STD (sleeve type) ∆ | 314.011.150 | 38515-587-16000 | 1 |
| 11 | shaft XS8,XS8S - 17-4 (no-sleeve type) ▲ | 314.011.160 | 38515-588-1706H | 1 |
| 13* | oil seal O/B - Nitrile | 314.011.250 | S1917 | 1 |
| 14 | retaining ring, bearing | 314.012.100 | S215 | 1 |
| 15* | o-ring - Buna | 314.012.500 | 25152-026 | 1 |
| 15* | o-ring - Viton | 314.012.501 | 25154-026 | 1 |
| 16* | shims, impeller | 314.011.500 | 5091-17090 | 1 |
| 17* | o-ring - Buna | 314.012.000 | S333 | 1 |
| 18* | oil seal I/B - Nitrile | 314.011.250 | S1917 | 2 |
| 19 | casing XS-8S - STD | 314.030.010 | 1 | |
| 20* | wear plate S8,XS8,XS8S - STD | 314.210.000 | 12348A-10010 | 1 |
| 20* | wear plate S8,XS8,XS8S - CD4 | 314.210.004 | 12348A-1718H | 1 |
| 21 | seal plate S8,XS8,XS8S - STD | 314.011.900 | 12350-10010 | 1 |
| 21 | seal plate S8,XS8,XS8S - CD4 | 314.011.904 | 12350-1718H | 1 |
| 22 | screw, impeller - STD | 310.011.700 | F1004S-1500G | 1 |
| 22 | screw, impeller - SS | 310.011.701 | F1004S-1704G | 1 |
| 23 | washer, impeller - STD | 310.011.800 | 31167-029-16000 | 1 |
| 23 | washer, impeller - SS | 310.011.801 | 31167-029-1706H | 1 |
| 24* | check valve S8,XS8,XS8S - STD | 314.120.000 | 46411-066 | 1 |
| 24* | check valve S8,XS8,XS8S - Viton | 314.120.001 | 46411-090 | 1 |
| 25 | pin, check valve, S8,XS8,XS8S | 314.100.000 | 12357-17010 | 1 |
| 26* | o-ring - Buna | 314.190.000 | S1915 | 1 |
| 26* | o-ring - Viton | 314.190.001 | 25154-459 | 1 |
| 27 | sight gauge | 310.011.400 | S1471 | 2 |
| 29* | gasket, fill cover (all but S12) | 310.280.000 | 50G-19210 | 1 |
| 30* | gasket, suction flg. S8,XS8,XS8S | 314.090.000 | 12356G-19370 | 1 |
| 31 | gasket, disch. flg. S8,XS8,XS8S | 314.040.000 | 1759GB-19370 | 1 |
| 33 | fill cover kit - STD (bar,plate,gask,scrw) | 310.350.000 | 1 | |
| 34* | o-ring - Buna | 314.011.600 | S1914 | 1 |
| 34* | o-ring - Viton | 314.011.601 | 25154-458 | 1 |
| 35 | casing ring, S8,XS8,XS8S,S10,XS10 - STD | 315.012.600 | 31281-016-15990 | 1 |
| 38 | cover (clean-out) XS-8S - STD | 314.130.010 | 1 | |
| 39 | spool, suction S8,XS8,XS8S - STD | 314.110.000 | 12356-10010 | 1 |
| 40 | spool, discharge S8,XS8,XS8S - STD | 314.070.000 | 12799-10010 | 1 |
| 55 | back cover wing nut XS-S - STD | 310.131.302 | 4 | |
| 63* | o-ring, (clean-out) I/B - Buna | 313.012.600 | 25152-384 | 1 |
| 63* | o-ring, (clean-out) I/B - Viton | 313.012.601 | 25154-384 | 1 |
| 64 | shaft key | 312.011.210 | N0616-15990 | 1 |
| 65 | pressure relief valve | 310.010.500 | 26662-005 | 1 |
Notes:
1a. p/n 314.010.310 mechanical seal, cartridge - includes sleeve o-ring, impeller shim set & sleeve.
1b. p/n 314.010.300 mechanical seal, component - includes sleeve o-ring, impeller shim set & NO sleeve.
2. parts are FOB Jacksonville, FL
3. * indicates recommended spares