S-2

Description

Model S-2

2" ANSI self priming, solids handling pump

Data

  • Bare Weight: 203lbs
  • Shipping Weight: 252lbs
  • Impeller Diameter: 6.25"
  • Dimensions: 24.38" x 12.14" x 20.59"
  • Max Solids: 1.75"

Priming Lift

  • 1150rpm (24ft) - 1440rpm (25ft)
  • 1750rpm (25ft) - 2050rpm (25ft)
  • 2350rpm (25ft) - 2650rpm (25ft)
  • 2650rpm (25ft) - 2900rpm (25ft)

before using the table, check the NPSH

Technical Data

Parts

Item Description AP Part No. GP Part No. QTY
1* impeller S2 - D/I(std)310.010.100 1
1* impeller S2 - CD4310.010.104 1
2* gasket, seal plate S2310.010.20038687-556-20000 1
3* seal, mech. - 1.5" (cart.w/sleeve) ∆310.010.31046513-151 1
3* seal, mech. - 1.5" (comp.no-sleeve) ▲310.010.30012364A 1
4* bearing, I/B - S2,S3,XS3310.011.30023252-013 1
5 housing, bearing S2 - C/I(std)310.010.400 1
7 vent, air310.010.600S1530 w/bushing 2
8* o-ring - Buna310.011.600 1
8* o-ring - Viton310.011.601 1
9 bearing, O/B - S2,S3,XS3310.012.300S1749 1
10 cap, bearing, S2,S3,XS3 - C/I(std)310.010.90038322-219-10010 1
11 shaft S2 - std ∆310.011.100 1
11 shaft S2 - 17-4 ▲310.011.120 1
13* oil seal O/B - Nitrile310.011.200S1352 1
14 retaining ring, bearing310.012.100S244 1
15* o-ring - Buna310.012.50025152-022 (S2088) 1
15* o-ring - Viton310.012.501 1
16* shims, impeller310.011.50037J-17090 1
17* gasket, bearing cap, S2,S3,XS3311.012.00038683-268-18000 1
18* oil seal I/B - Nitrile310.011.200S1352 1
19 casing S2 - C/I(std)310.030.000 1
20* wear plate S2 - std310.210.000 1
20* wear plate S2 - CD4310.210.004 1
21 seal plate S2 - C/I(std)310.011.900 1
21 seal plate S2 - CD4310.011.904 1
22 screw, impeller - std310.011.700F1004S-1500G 1
22 screw, impeller - SS310.011.701F1004S-1704G 1
23 washer, impeller S2 - std310.011.820 1
23 washer, impeller S2 - SS310.011.821 1
24* check valve S2 - STD310.120.000 1
24* check valve S2 - Viton310.120.001 1
25 pin, check valve S2310.100.000 1
26* o-ring - Buna310.190.000 1
26* o-ring - Viton310.190.001 1
27 sight gauge310.011.400S1471 1
28 screw, rot.ass'y adj.310.080.000 4
29* gasket, fill cover (all but S12)310.280.00050G-19210 1
30* gasket, suction flg. S2310.090.000 1
31 gasket, disch. flg. S2310.040.000 1
33 fill cover kit - std (bar,plate,gask,scrw)310.350.000 1
38 cover plate (clean-out) S2 - C/I(std)310.130.000 1
39 spool, suction S2 - C/I(std)310.110.000 1
40 spool, discharge S2 - C/I(std)310.070.000 1

Notes:

1a. p/n 310.010.310 mechanical seal, cartridge - includes sleeve o-ring, impeller shim set & sleeve.

1b. p/n 310.010.300 mechanical seal, component - includes sleeve o-ring, impeller shim set & NO sleeve.

2. parts are FOB Jacksonville, FL

3. * indicates recommended spares